Grouting Chemical for Concrete

Ultra Con High Strength Type

  •  Price
inquiry
  • Feature & Purpose
Dual Component High Strength Polyurethane Resin

Information

ULTRA CON is self-reacting type Hydrophobic Type 2 Component Polyurethane Resin which is invented by using polyether polyol. Grouting Chemical for Concrete It is applied to waterstop leakage section and it is high strength reinforcement material that reinforces dry crack caused by defect of concrete structure and buildings. Foam rate that reacts with water is minimized. This is restrained non-discharge & low-discharge waterstop material that hardened foam is harder than normal polyurethane foam and also density is high. Therefore, it does not have defects caused by deformation and it waterstop effects last semi-permanently. It provides strong physical strength after hardened. Furthermore, low viscosity and strong penetration ability brings excellent adhesive power even on the wet surface. It is non-elastic polyurethane reinforcement material.

Feature

  • Since it has low viscosity, it penetrates into minute crack. It provides complete waterstop result.
  • It shows much more excellent strength than mechanical strength of normal concrete structure. Compressive Strength (800kg/cm²), Curve Strength(400kg/cm²) and Seal Strength(350kg/cm²)
  • Hardened foam has excellent adhesiveness on both wet and dry surface of concrete main body. Therefore it won’t get exfoliated and maintains excellent waterstop ability for long period of time.
  • When main component and hardening component is mixed you have enough working time (about 60~100min), therefore you can inject it by using 1 component type pump. And you can control the hardening time freely by adding catalyst.

Purpose

  • Repair and reinforce wet and dry crack of all concrete structures
  • Leak sealing and reinforcement of ground and bedrock
  • Crevice filling, waterstop and reinforcement

 

Application

Normally it can be used to waterstop all types of concrete structures and buildings when there is a leak. Especially it can reinforce and waterstops cracks and joint section of concrete constructions. Grouting Chemical for Concrete It can be applied on following places.

  • Waterstops for leaking section of basement parking lot and underground concrete structure.
  • Waterstops for leakage of concrete joint section.
  • Waterstops for leakage section where humidity and dryness is mixed up together.
  • Pot Life The period of time during which you can work without a change in viscosity after resin and hardener are mixed.
  • Tack Free the state of hardening in which you can lightly touch the mixed resin with your hand, But the hardened material does not stick.
  • Hardening Time the time it takes for the mixed resin to be hardened enough to realize about 80% of final mechanical strength.
Ultra Con Dimension Details
ClassificationMain ComponentHardening ComponentRemarks
Exterior AppearanceNo ColorDark Brown Liquid
Mixing Rate100100Weight Ratio
Specific Gravity1.1 ± 0.11.2 ± 0.123±0.5℃
Viscosity100 ~ 150150 ~ 20023±0.5℃
Mixture Viscosity200 ± 10023±0.5℃
Working Time(Hours)6023±0.5℃
Hardening Time(Hours)24
Packing Unit20kg20kg
Ultra Con Property Data
Test CategoryResult ValueBase ValueTest Method
Viscosity( mPa,s )210Under 300

      KS F 4923

Compression Strength( N/㎟ )85.4Under 50
Seal Strength( N/㎟ )52.7Under 15
Seal Breaking Expansion Rate ( % )3Under 10
Adhesive Strength( N/㎟ )10.3Under 6
Hardening Contraction Rate ( % )0.9Under 3
Heating ChangeWeight Change Rate( % )1.6Under 5
(110±3℃,168hr)Volume Change Rate( % )1.2Under 5

Hydroguardian India was founded with a mission to provide top-quality grouting chemicals and solutions that make structures leak-proof.

Mon-Sat:

09:00 Am - 11:00 Pm

Other

Licensed & Insured Technicians

Affordable Rates & Transparent Pricing

Satisfaction Guarantee

Request a Free Quote

© 2024 Hydroguardindia Pvt. Lt.