| inquiry |
| Single Component Semi-Rigid Polyurethane Foam |
grouting chemical for concrete DHP-4000 is Hydrophobic Type and 2 component type quick setting Foam. It is specially manufactured for crack leakage and where water pressure is severe. Due to field conditions, you can control the reaction speed by using catalyst. It foams in 15 seconds at minimum. Therefore, it is applied where it requires quick setting such place like civil engineering field and underground structures. Since it is hydrophile property, it even reacts with small amount water. And the foam that the reacting is finished will not be influenced by water and moisture Hydro
|
|
|
|
|
grouting chemical for concrete Use for the cracks water stop of concrete structures and waterstop treatment for joint areas, wet areas and areas of considerable leaks, and can be used in the following areas.
|
|
|
|
|
Property Data | |
---|---|
Classification | Base Value |
Exterior Appearance | Brown Transparent Liquid |
Mixing Rate | 10:1 |
Viscosity( mPa.s ) | 250 ± 50 |
Specific Gravity | 1.1 ± 0.1 |
Tensile Strength( N/㎟ ) | 0.1over |
Elongation Percentage( % ) | 50%under |
Packing Unit | 18.2kg / 1.8kg |
Foaming Percentage(%) | 3000% |
Reaction Data on a Different Temperature Conditions | ||||
---|---|---|---|---|
Temperature Conditions | 5℃ | 15℃ | 25℃ | 30℃ |
Foaming Starts(sec) | 35 | 27 | 16 | 13 |
Foaming Ends(sec) | 215 | 165 | 126 | 105 |
Foaming Percentage(%) | 800 | 840 | 870 | 880 |
Viscosity | 510 | 360 | 250 | 195 |
Respons to Mixing of Water | ||||
---|---|---|---|---|
Mixture(Resin:Water) | Foaming Starts(sec) | Foaming Ends(sec) | Foaming Percentage | Type of Foam |
10 : 1 | 14 | 98 | 3800 | Semi-Rigid |
10 : 3 | 18 | 105 | 3500 | Semi-Rigid |
10 : 5 | 23 | 112 | 3100 | Semi-Rigid |
10 : 10 | 27 | 119 | 2700 | Semi-Rigid |
Hydroguardian India was founded with a mission to provide top-quality grouting chemicals and solutions that make structures leak-proof.
09:00 Am - 11:00 Pm
© 2024 Hydroguardindia Pvt. Lt.